English edition. Prices are in Japanese yen from Japanese online stores, and most shops ship within Japan only. Links marked JP open pages in Japanese. Buying from outside Japan? Rakuten's own forwarding service, Rakuten Global Express, ships Rakuten Ichiba orders to more than 80 countries and regions. Odd-shaped boxes such as golf clubs can cost extra to pack. Check their shipping quote before you order. New to it? See our step-by-step guide to buying from Rakuten Japan.

Disclosure: this page contains affiliate links. If you buy through them, I may earn a commission at no extra cost to you.

Home › Guides › PRGR R35 vs. R50 Wedges

New products

PRGR R35 Wedge vs. R50 Wedge: Differences, Price and Release DateThe 2 wedges out Nov 12, 2026, lined up against PRGR's own regular 50° wedge using official numbers

Updated: Oct 14, 2026Contains affiliate links

Two clubs are coming that go after chunks and thin shots around the green by making the club heavier.
PRGR's R35 wedge and R50 wedge. On sale Nov 12, 2026, both at ¥33,000 (incl. tax).
When I lined up the spec sheets, the only number that differed was loft. 35° and 50°. This article lets you decide which one to carry, or whether you need either.

The Gear Nerd's Pick

If you carry just one, make it the R35. What these two really are is putters in the shape of a wedge. 34 inches long, 71° lie angle, 559g total weight. Every one of those is a putter number, not a regular wedge number.
Heavy, short and upright. That leaves no room to use your wrists, so all you can do is swing with your shoulders. Chunks and thin shots both come from the wrists releasing so the head drops early, or from scooping. The design closes off that source.
The 35° R35 is designed to roll three times as far as it carries. It needs the smallest swing. If I were choosing, I'd take this one first.

Where to buy the R35 wedge and R50 wedge

PRGR R35 wedge (2026 model, 35°)

Product image: PRGR R35 wedge (2026 model, 35°) (Rakuten Ichiba)Image: Rakuten Ichiba

Buying from outside Japan? Sign up free for Rakuten Global Express (Rakuten's official forwarding service) and check out with its Japan warehouse address → full guide

PRGR R50 wedge (2026 model, 50°)

Product image: PRGR R50 wedge (2026 model, 50°) (Rakuten Ichiba)Image: Rakuten Ichiba

Buying from outside Japan? Sign up free for Rakuten Global Express (Rakuten's official forwarding service) and check out with its Japan warehouse address → full guide

Ad. Links go to each store's product page ("Search ..." links go to search results). Price, shipping, stock and specs such as loft, shaft and number of clubs differ by store. Check the product page before you buy.

Product images of the PRGR R35 wedge and R50 wedge, with the price ¥33,000

Header image: product photo from Rakuten Ichiba (Ad) | PRGR R35 wedge (2026 model), PRGR R50 wedge (2026 model)

In this article

  1. Bottom line
  2. How I picked: three yardsticks
  3. The R35 and R50 are out Nov 12 at ¥33,000 each. Only the loft differs
  4. 110g heavier than a regular 50°. Half is the head, 40% is the grip
  5. The sole's ground-contact area has been halved
  6. From 20 yards, the R35 lands it 5 yards out. The R50, 10 yards out
  7. Why the R35 comes first (the reason for the order)
  8. What I like
  9. What to watch for
  10. Who it suits: if you're torn, choose by what you want
  11. Price and where to buy: before you buy, roll ten balls with your 8-iron
  12. About the writer and sources
  13. FAQ

PRGR R35 vs R50 wedge: release date, price and bottom line

Some players need the R50 first.
Those who often lose strokes where there's a bunker or rough between them and the green and no way to run the ball. The 35° can't carry it.
Others need neither: players who already get close by rolling an 8-iron or 9-iron. There's no reason to spend ¥33,000 and one of your 14 clubs on it.

How I picked: three yardsticks

By these yardsticks, if I could carry only one, I'd put the R35 first.

The R35 and R50 are out Nov 12 at ¥33,000 each. Only the loft differs

These are the numbers on PRGR's official product pages. Apart from the loft row, the two were the same.

This table scrolls sidewaysSwipe right →
ItemR35 wedgeR50 wedge
Release dateNov 12, 2026Nov 12, 2026
Price (incl. tax)¥33,000¥33,000
Loft35°50 degrees
Carry and roll (maker's explanation)1: 31: 1
Lie71°71°
Length34 in / 32 in34 in / 32 in
Total weight559g / 553g559g / 553g
Swing weightE-4 / C-7.5E-4 / C-7.5
Shaft weight109g / 103g109g / 103g
Grip96g, no cord96g, no cord
HeadNickel-chromium-molybdenum steel, investment cast + CNC milledSame
Bounce anglenot publishednot published

Source: PRGR official product pages and news release (checked Oct 14, 2026). Left of the "/" is the 34-inch value, right is the 32-inch value. Prices are MSRP. The clubs are made in Japan.

The R35 is a rebuild of a model that has run since 2005, and the R50 is a first. Lengths are 34 inches and 32 inches. Choose the one closer to the length of the putter you use now.

110g heavier than a regular 50°. Half is the head, 40% is the grip

I compare the R50, which has the same loft, against PRGR's ordinary 50° wedge.

This table scrolls sidewaysSwipe right →
ItemR50 wedge (34 in)PRGR 0 TOUR wedge 50°
Price (incl. tax)¥33,000¥26,400 (steel)
Loft50 degrees50 degrees
Lie71°63.5–64°
Length34 in35.25 in
Total weight559g449g
Shaft weight109g97g
Grip weight96g50g
Swing weightE-4D-1.5

Source: PRGR official product pages (checked Oct 14, 2026). The 0 TOUR wedge values are for Spec Steel Ver.2. Lie angle is listed as 63.5–64° across the 8 lofts from 48° to 60°.

110 g: that much heavier than an ordinary 50° from the same maker (my calculation). Breaking it down: 46 g in the grip, 12 g in the shaft, and the other 52 g in the head and around it.

The grip is 96 g, about twice that of an ordinary wedge grip. PRGR also writes that the outer diameter is about 5 mm thicker than before. A heavy, thick grip works as a brake on a wrist-flicking motion. The lie is about 7° more upright, so the whole sole sits flat at address. The length is 1.25 inches shorter. The weight, the angle and the length are all numbers chosen to push your approach toward a putting stroke.

The sole's ground-contact area has been halved

The bounce figure isn't published. What PRGR does describe is the shape of the sole. A raised rib called a "sliding rail" lifts the base and halves the area that touches the ground compared with the previous product. The leading edge is also rounded so it digs in less.

The R35 and R50 assume a setup where your hands don't go forward. The face progression is 2 mm, and the leading edge lines up almost with the shaft line. I wrote about why bounce disappears in chunked chips and bounce.

From 20 yards, the R35 lands it 5 yards out. The R50, 10 yards out

Let's apply the maker's ratios to a shot with 20 yards to the pin.

This table scrolls sidewaysSwipe right →
ModelCarry : rollLanding spotRoll distance
R35 wedge1: 35 yards out15 yards
R50 wedge1: 110 yards out10 yards

The ratios are PRGR's official explanation. The yardages are my calculation (just 20 yards split by the ratio) and will change with green speed and slope.

The R35 gets there if you land it 5 yards short. The nearer the landing spot, the shorter the swing, and the fewer the mishits. But it only works if the 5 yards short is on the green or the fringe. If rough or bunker runs 10 yards, the R35 can't carry it. That's where the R50 comes in.

Why the R35 comes first (the reason for the order)

This table scrolls sidewaysSwipe right →
RankModelYardstick figureWhy
1R35 wedge35°, carry 1 : roll 3The smallest swing is enough. It suits many situations where you can roll the ball
2R50 wedge50°, carry 1 : roll 1Lets you carry something and stop it, where there's no path to roll

Where to buy the PRGR R35 wedge

Buying from outside Japan? Sign up free for Rakuten Global Express (Rakuten's official forwarding service) and check out with its Japan warehouse address → full guide

Ad. Links go to each store’s product page. Price, shipping, stock and specs (loft, shaft, set make-up) differ by store, so check the product page before you buy.

What I like

What to watch for

Who it suits: if you're torn, choose by what you want

Flowchart for sorting it out. When you chunk or thin it around the green, do you need the R35 or R50? First choke down on an 8-iron and roll 10 balls with a putting stroke. If they finish close, your current 8-iron is enough and you don't need to buy. If contact isn't consistent, the R35, which lends you weight and length through the tool, is a candidate. If your trouble is when there's no path to roll the ball, the R50 is a candidate. The order to try: rolling it with an 8-iron ¥0, checking your wedge's bounce ¥0, adding the R35 ¥33,000, and the R50 if you often have to carry something.
Sorting out whether you need the R35 or R50, and the order to try things

Price and where to buy: before you buy, roll ten balls with your 8-iron

Before the ¥33,000, there's something you can do for ¥0. Choke down on an 8-iron, take the same grip as a putter, swing with just your shoulders, and roll ten balls from just off the practice green. If seven or more finish within a one-putt distance, your 8-iron is enough. If the roll suits you but your contact is inconsistent, the R35; if you're in trouble where there's no path to roll, the R50.

It goes on sale Nov 12. Once shop prices and third-party measurements are out, I'll add a check here. For new ordinary wedges, see new wedges 2026; for how many wedges of which loft, see how many wedges to carry.

Update history

About the writer and sources

Written by a gear nerd who studies golf equipment, averages a 72, and plays about 150 rounds a year.

I re-read the numbers against the sources below on Oct 14, 2026. Last updated Oct 14, 2026.

FAQ

When do the PRGR R35 wedge and R50 wedge go on sale, and what do they cost?

Both go on sale Nov 12, 2026, with an MSRP of ¥33,000 (incl. tax). They come in 34-inch and 32-inch lengths (PRGR official, checked Oct 14, 2026).

What is the difference between the R35 and the R50?

On the spec sheet, the only difference is loft. PRGR explains that the R35, at 35°, is designed to get the ball close with 3 parts roll to 1 part carry, and the R50, at 50°, with 1 part roll to 1 part carry. The 71° lie angle, 559g total weight (34 inches) and price are the same.

How are they different from a regular wedge?

Compared with PRGR's own 0 TOUR wedge 50° (449g, 35.25 inches, 63.5–64° lie angle), the R50 is 110g heavier, 1.25 inches shorter and about 7° more upright in lie angle. It has a putter's length and lie angle, and it's built to be swung like a putter.

Can it be used in competition?

The product page says they "conform to the new groove rule of 2010." Under the R&A Equipment Rules, clubs like these (chippers) are iron clubs, and they are allowed only one grip, which must be circular in cross-section. Swap in a flat putter grip and the club no longer conforms.

Ready to choose? Start here

Related reading

【Hardcore Golfer's Review】Lynx Zero Magic II | 0° Bounce, 34 Inches
A 0° bounce, approx. 480g wedge you chip with a putting stroke.

Chunked chips and bounce
The more you press your hands forward, the more bounce disappears. What to check first with a regular wedge.

Latest Wedges 2026
The other new wedges of 2026, lined up by loft and bounce.

How many wedges to carry
Working back from your PW loft: which lofts and how many to carry.

Lynx Slide Sole Master 56°
Another 56° that makes a clean trade-off, sliding the sole with 1° of bounce.

Sources for this article

Last updated: Oct 14, 2026

Specs and prices are the figures published on manufacturers' official websites and in press releases, and by media outlets (checked Oct 14, 2026). They were not measured by this site.

Read next

Most read on this site

How to Choose a Hybrid

Which Srixon Iron Are You? ZXi5 vs. ZXi7

SPEEDER BOOST BLACK vs. the standard version